Sale!

Nintendo Switch Game Card Slot Reader + 3.5mm Audio Jack PULL-A Replacement

Original price was: $22.00.Current price is: $5.50.

SKU: 72176924485932 Categories: Game Console Replacement, JPC MOBILE ACCESSORIES

Description
Reviews (0)

PULL-A Grade Part

This part fixes two problems at once. Your Switch won’t read game cards? Headphone jack broken? This combo part solves both. It is a PULL-A grade unit pulled from a working console. Tested and ready to install. Ships fast from Brisbane to all of Australia.

2-in-1 Part

Card + Audio

PULL-A Grade

Tested & Working

OEM Quality

Original Part

Brisbane Stock

Fast Dispatch

✅ What This Part Fixes

“Game card could not be read” error message
Switch not detecting any game cartridges
Bent or damaged card slot pins
Headphone jack not working or crackling
No sound through wired headphones
Broken headphone plug stuck in port

🔄 What is PULL-A Grade?

PULL-A means this part was pulled from a working console. It is not new. It is not aftermarket. It is an original Nintendo part that was tested and works perfectly. PULL-A parts cost less than new OEM but give you the same quality. Smart choice for repair techs who want reliable parts at fair prices.

Why Choose This Part?

🎮 Two Repairs in One

The game card reader and audio jack are on the same board. Buy one part. Fix two problems. Save time and money on your repair.

✅ Pre-Tested Quality

Every PULL-A part is tested before we ship it. We check card reading and audio output. Only working units go out the door.

🔧 OEM Original Part

This is a genuine Nintendo part. Same as what was in your Switch from the factory. No cheap knockoffs or low quality copies.

💰 Better Value

PULL-A costs less than brand new parts. You get the same quality for a lower price. Great for repair shops and DIY fixers.

🚚 Fast Australian Shipping

Ships from Brisbane within 2-4 business days. No waiting weeks for overseas parts. Get your repair done faster.

🎯 Plug & Play Install

This part plugs into the motherboard with a ribbon cable. No soldering needed. Just disconnect old, connect new.

Technical Specifications

Part Type

Combo Board

Functions

Card + Audio

Audio Jack

3.5mm Stereo

Quality

PULL-A

Install Type

Plug-In

Origin

OEM Nintendo

✅ Compatible Consoles

Nintendo Switch (1st Generation)

Model: HAC-001 (Original 2017 Switch)

Find your model number on the back of your Switch near the bottom.

⚠️ Not Compatible With:

Switch Lite (HDH-001)
Switch OLED (HEG-001)
Switch V2/Mariko (HAC-001-01) – May not be compatible

Who Uses This Part?

🔧

Console Repair Techs

OEM quality at PULL-A prices. Pre-tested to save your bench time. Great margins on Switch repairs.

🏢

Game Repair Shops

Stock up on common Switch parts. Card reader issues are very common. Fast turnaround for customers.

🎮

DIY Gamers

Fix your own Switch and save money. Many guides online. Pro install still recommended for best results.

🔧 Installation Recommendation

We recommend professional installation. This repair requires opening the Switch and removing the heat sink. You need Y00 tri-wing and Phillips screwdrivers. The ribbon cable connector is delicate. One wrong move can damage your console. If you are new to console repair, let a pro handle it.

Tools needed: Y00 tri-wing screwdriver, Phillips #00 screwdriver, plastic pry tools, tweezers

🚚 Fast Australian Shipping

Dispatch: Ships within 2-4 business days from Brisbane
Brisbane Metro: 1-3 business days after dispatch
Sydney/Melbourne: 3-5 business days after dispatch
Perth/Regional: 5-8 business days after dispatch
Tracking: Australia Post tracking included

Frequently Asked Questions

What does PULL-A grade mean for this part?+

PULL-A means this part was pulled from a working Nintendo Switch console. It is an original OEM Nintendo part, not a cheap copy. Before we sell it, we test it to make sure it works. PULL-A parts give you the same quality as new for a lower price. This is how repair shops save money on parts without losing quality.

Does this fix both game card and headphone issues?+

Yes, this is a 2-in-1 part. The game card reader and headphone jack are on the same circuit board. When you replace this part, you fix both at the same time. If your Switch shows the “game card could not be read” error or your headphones don’t work, this one part can fix both problems. You save money by not buying two separate parts.

Will this work with my Switch model?+

This part fits the original Nintendo Switch from 2017. Check the back of your console for model number HAC-001. This is the first Switch model. It does NOT fit the Switch Lite, Switch OLED, or the newer V2 Switch with better battery. If your model says HAC-001-01, it may not be compatible. When in doubt, contact us before ordering.

Do I need to solder to install this part?+

No soldering is needed. This part connects to the motherboard with a ribbon cable. You unplug the old one and plug in the new one. However, you still need to open the Switch and remove the heat sink to reach the connector. This takes skill and proper tools. If you have never opened a game console before, we recommend professional installation.

What causes the game card reader to fail?+

The most common causes are bent pins inside the card slot, dirty contacts, or wear from inserting and removing games many times. Kids often push cards in at an angle which bends the pins. Dust and debris can also block the contacts. Sometimes the reader just wears out over time. This replacement part gives you fresh pins and contacts.

Why did my headphone jack stop working?+

Headphone jacks fail for several reasons. The most common is a broken headphone plug stuck inside the port. Yanking the cable out at an angle can damage the internal contacts. Dust and pocket lint can also block the connection. Sometimes the jack just wears out from use. This replacement gives you a working port so you can use wired headphones again.

How long does the installation take?+

For an experienced repair tech, this takes about 30 to 45 minutes. For a first-time DIY person, expect 60 to 90 minutes. You need to remove the back cover, disconnect the battery, remove the heat sink and shield, and then access the card reader board. Take your time. Rushing leads to mistakes. Watch a guide video before you start.

What tools do I need for this repair?+

You need a Y00 tri-wing screwdriver for the back panel screws. You need a Phillips 00 or JIS 00 screwdriver for the internal screws. A plastic pry tool or spudger helps open clips and connectors. Tweezers are helpful for small cables. You may also want thermal paste if you remove the heat sink. We sell repair tool kits if you need them.

Can I test the part before fully assembling?+

Yes, and you should. After connecting the new part, reconnect the battery and test before you put everything back together. Insert a game card and check if the Switch reads it. Plug in headphones and play audio. If something is wrong, it is easier to fix before you close up the console. Only seal it up after you confirm everything works.

How is PULL-A different from aftermarket parts?+

PULL-A parts are original Nintendo parts. They came out of real Switch consoles. Aftermarket parts are new but made by third parties. They may look similar but the quality can vary. PULL-A gives you genuine Nintendo quality at a used part price. For game card readers, original parts often work better because the pin alignment and contact quality is exact.

More Nintendo Switch Parts

🔋

Switch Batteries

HAC-003 Cells

🕹️

Joy-Con Parts

Sticks & Buttons

🔧

Repair Tool Kits

Screwdrivers & Pry

Questions About This Part?

Our Brisbane team helps repair techs and gamers every day.

📍 Forest Lake, QLD 📞 0480 039 913

Reviews

There are no reviews yet.

Nintendo Switch Game Card Slot Reader + 3.5mm Audio Jack PULL-A Replacement

✅ What This Part Fixes

🔄 What is PULL-A Grade?

Why Choose This Part?

🎮 Two Repairs in One

✅ Pre-Tested Quality

🔧 OEM Original Part

💰 Better Value

🚚 Fast Australian Shipping

🎯 Plug & Play Install

Technical Specifications

✅ Compatible Consoles

Nintendo Switch (1st Generation)

Who Uses This Part?

Console Repair Techs

Game Repair Shops

DIY Gamers

🔧 Installation Recommendation

🚚 Fast Australian Shipping

Frequently Asked Questions

More Nintendo Switch Parts

Questions About This Part?

Reviews

Be the first to review “Nintendo Switch Game Card Slot Reader + 3.5mm Audio Jack PULL-A Replacement” Cancel reply

Related products

Login