Game Boy Pocket CleanPower Regulator – RetroSix

• The CleanPower replaces the original power regulator PCB of the Game Boy Pocket with a modern smooth and healthy power supply.
• The CleanPower board provides a clean, stable and efficient 5V line to the system to keep the lifespan of your console at it’s best.
• To install, see images. Simply de-solder the old power regulator and solder the CleanPower in the same place as the original regulator.
• The input range of the CleanPower on VIN is 2.5V to 12V. This gives modders a much wider range if they want to install 2S lipo kits!

INCLUDED:

• 1x CleanPower Regulator

DOCUMENTATION:

NOTES:

• The CleanPower only supports most modern screens and does not provide the voltages for the original screens. If you want to use the original screen simply leave the original regulator in place. You will need to cut the top right pin on the original regulator (Pin 6 when looking at the console from the button side. See photos for details), however this will vary by user. Then the old regulator will supply the LCD voltages, and the CleanPower will supply the bulk system power for the console.
• If you are using an aftermarket LCD kit (such as one by Hispeedido and FunnyPlaying), or original LCD kit, in order to use the contrast wheel brightness function, you will just leave the old regulator fully in place and solder the CleanPower over top as in the method above. If your regulator is completely non-functional, you may not then have use of the contrast wheel with this regulator.
• Created by RetroSix.