BlueRetro Super Nintendo/Famicom Wireless Bluetooth Controller Receiver

Supported Controllers:

• Xbox One 
• Xbox Series X|S 
• Wii
• Wii U Pro
• Switch Pro
• Switch Joycon
• 8BitDo Wireless Controllers
• Retro-Bit Wireless Controllers
• PS3 (Official Only)
• PS4 (Official Only)
• PS5

Features:

• Works with Both Super Nintendo and Super Famicom Systems!
• Button Remapping!
• Supports “Over the Air” Firmware Updates!
• Under 4ms latency!
• Only Suitable for SNES/SFC Consoles! 

 

Pairing Process:

1. Insert the receiver into your Nintendo console
2. Once the LED begins to blink, it signifies that the pairing mode has been activated.
3. Now, pair the controller of your preference.
4. Once the controller is successfully paired, it will automatically pair with each use until the BT keys have been cleared.

Button Functions:

• A brief press (when not in BT inquiry mode): This will disconnect all Bluetooth devices from the adapter.
• A brief press (in BT inquiry mode): This will terminate the Bluetooth pairing mode.
• Holding down for 3 seconds: This will enable the Bluetooth pairing mode for a new pairing.
• Holding down for 10 seconds: This will perform a factory reset on the adapter, restoring it to default settings, and will erase BT pairing keys.

LED Indicator:

• Red Led Constant: Bluetooth Failure
• Red Led Flashing: Pairing Mode Enabled
• Blue Led Constant: Controller Successfully Paired

Please note: that this product does not support hot plugging, so it is important to insert it into the controller port before turning on the console.