Game Boy Color 2.45″ Drop-in IPS LCD Backlight Kit with OSD – Hispeedido

• Doesn’t Require Soldering or Shell Trimming. Cartridge pin trimming may be required. Please see install guide.
• Same display size as the original screen.
• 9 to 1 pixel Integer Scaling.
• Built-in OSD Menu.
• Retro pixel Effects
• 15 brightness levels.
• 8 color modes.
• Image position adjustable in the OSD menu. 

INCLUDED:

• 1x LCD
• 1x PCB with touch sensors
• 1x Ribbon
• 3x Wires
• 1x Insulation Film
• 1x Adhesive

PAIRS WELL WITH:

• Game Boy Color Replacement Shell

DOCUMENTATION

• Install Guide
• How to test your LCD kit

NOTES:

• OSD can be operated with touch sensors (no soldering required) or button presses (requires soldering).
• Touch the two touchpads for 5 seconds to active the OSD menu.
• Touch the left touchpad to select an option when OSD Menu activated.
• Touch the right touchpad to adjust the option when OSD Menu activated.

WARNINGS:

• Test before installation! When you receive a backlight/LCD kit, you should perform a dry run before installing to assure that nothing has been damaged in transit. A dry run or test fit means the kit is not installed in the shell. This includes the use of adhesives, brackets, and any performed soldering. All ribbon cables should have no bends or creases in them. If you are unsure how to perform a dry run, please contact our support team and we will be happy to help. Backlight kits that have been installed are not eligible for replacement or return.
• LCD may break if put under too much pressure or dropped. Please exercise extreme caution when installing.
• Damage to console or LCD may occur if you do not trim the cartridge port pins. Exercise caution when trimming pins, wear eye protection to protect from pin debris when cutting the metal. Damage caused by these pins are not covered under our return or exchange policy. Trim the pins of your Gameboy’s cartridge slot flat so that they don’t interfere with any parts of the kit. We also recommend placing some Kapton tape over the trimmed pins to prevent any shorts.